How to use an optimizer¶

To use torch.optim you have to construct an optimizer object, that will hold the current state and will update the parameters based on the computed gradients.

optimizer = optim.SGD(model.parameters(), lr=0.01, momentum=0.9)
optimizer = optim.Adam([var1, var2], lr=0.0001)

optim.SGD([
                {'params': model.base.parameters()},
                {'params': model.classifier.parameters(), 'lr': 1e-3}
            ], lr=1e-2, momentum=0.9)

for input, target in dataset:
    optimizer.zero_grad()
    output = model(input)
    loss = loss_fn(output, target)
    loss.backward()
    optimizer.step()

for input, target in dataset:
    def closure():
        optimizer.zero_grad()
        output = model(input)
        loss = loss_fn(output, target)
        loss.backward()
        return loss
    optimizer.step(closure)

Algorithms¶

class torch.optim.Optimizer(params, defaults)[source]¶

Base class for all optimizers.

Warning

Parameters need to be specified as collections that have a deterministic ordering that is consistent between runs. Examples of objects that don’t satisfy those properties are sets and iterators over values of dictionaries.

Parameters

• params (iterable) – an iterable of torch.Tensor s or dict s. Specifies what Tensors should be optimized.

• defaults – (dict): a dict containing default values of optimization options (used when a parameter group doesn’t specify them).

add_param_group(param_group)[source]¶

Add a param group to the Optimizer s param_groups.

This can be useful when fine tuning a pre-trained network as frozen layers can be made trainable and added to the Optimizer as training progresses.

Parameters

• param_group (dict) – Specifies what Tensors should be optimized along with group

• optimization options. (specific) –

load_state_dict(state_dict)[source]¶

Loads the optimizer state.

Parameters

state_dict (dict) – optimizer state. Should be an object returned from a call to state_dict().

state_dict()[source]¶

Returns the state of the optimizer as a dict.

It contains two entries:

• state - a dict holding current optimization state. Its content

  differs between optimizer classes.

• param_groups - a dict containing all parameter groups

step(closure)[source]¶

Performs a single optimization step (parameter update).

Parameters

closure (callable) – A closure that reevaluates the model and returns the loss. Optional for most optimizers.

Note

Unless otherwise specified, this function should not modify the .grad field of the parameters.

zero_grad(set_to_none: bool = False)[source]¶

Sets the gradients of all optimized torch.Tensor s to zero.

Parameters

set_to_none (bool) – instead of setting to zero, set the grads to None. This is will in general have lower memory footprint, and can modestly improve performance. However, it changes certain behaviors. For example: 1. When the user tries to access a gradient and perform manual ops on it, a None attribute or a Tensor full of 0s will behave differently. 2. If the user requests zero_grad(set_to_none=True) followed by a backward pass, .grads are guaranteed to be None for params that did not receive a gradient. 3. torch.optim optimizers have a different behavior if the gradient is 0 or None (in one case it does the step with a gradient of 0 and in the other it skips the step altogether).

class torch.optim.Adadelta(params, lr=1.0, rho=0.9, eps=1e-06, weight_decay=0)[source]¶

Implements Adadelta algorithm.

It has been proposed in ADADELTA: An Adaptive Learning Rate Method.

Parameters

• params (iterable) – iterable of parameters to optimize or dicts defining parameter groups

• rho (float, optional) – coefficient used for computing a running average of squared gradients (default: 0.9)

• eps (float, optional) – term added to the denominator to improve numerical stability (default: 1e-6)

• lr (float, optional) – coefficient that scale delta before it is applied to the parameters (default: 1.0)

• weight_decay (float, optional) – weight decay (L2 penalty) (default: 0)

step(closure=None)[source]¶

Performs a single optimization step.

Parameters

closure (callable, optional) – A closure that reevaluates the model and returns the loss.

class torch.optim.Adagrad(params, lr=0.01, lr_decay=0, weight_decay=0, initial_accumulator_value=0, eps=1e-10)[source]¶

Implements Adagrad algorithm.

It has been proposed in Adaptive Subgradient Methods for Online Learning and Stochastic Optimization.

Parameters

• params (iterable) – iterable of parameters to optimize or dicts defining parameter groups

• lr (float, optional) – learning rate (default: 1e-2)

• lr_decay (float, optional) – learning rate decay (default: 0)

• weight_decay (float, optional) – weight decay (L2 penalty) (default: 0)

• eps (float, optional) – term added to the denominator to improve numerical stability (default: 1e-10)

step(closure=None)[source]¶

Performs a single optimization step.

Parameters

closure (callable, optional) – A closure that reevaluates the model and returns the loss.

class torch.optim.Adam(params, lr=0.001, betas=(0.9, 0.999), eps=1e-08, weight_decay=0, amsgrad=False)[source]¶

Implements Adam algorithm.

It has been proposed in Adam: A Method for Stochastic Optimization. The implementation of the L2 penalty follows changes proposed in Decoupled Weight Decay Regularization.

Parameters

• params (iterable) – iterable of parameters to optimize or dicts defining parameter groups

• lr (float, optional) – learning rate (default: 1e-3)

• betas (Tuple[float, float], optional) – coefficients used for computing running averages of gradient and its square (default: (0.9, 0.999))

• eps (float, optional) – term added to the denominator to improve numerical stability (default: 1e-8)

• weight_decay (float, optional) – weight decay (L2 penalty) (default: 0)

• amsgrad (boolean, optional) – whether to use the AMSGrad variant of this algorithm from the paper On the Convergence of Adam and Beyond (default: False)

step(closure=None)[source]¶

Performs a single optimization step.

Parameters

closure (callable, optional) – A closure that reevaluates the model and returns the loss.

class torch.optim.AdamW(params, lr=0.001, betas=(0.9, 0.999), eps=1e-08, weight_decay=0.01, amsgrad=False)[source]¶

Implements AdamW algorithm.

The original Adam algorithm was proposed in Adam: A Method for Stochastic Optimization. The AdamW variant was proposed in Decoupled Weight Decay Regularization.

Parameters

• params (iterable) – iterable of parameters to optimize or dicts defining parameter groups

• lr (float, optional) – learning rate (default: 1e-3)

• betas (Tuple[float, float], optional) – coefficients used for computing running averages of gradient and its square (default: (0.9, 0.999))

• eps (float, optional) – term added to the denominator to improve numerical stability (default: 1e-8)

• weight_decay (float, optional) – weight decay coefficient (default: 1e-2)

• amsgrad (boolean, optional) – whether to use the AMSGrad variant of this algorithm from the paper On the Convergence of Adam and Beyond (default: False)

step(closure=None)[source]¶

Performs a single optimization step.

Parameters

closure (callable, optional) – A closure that reevaluates the model and returns the loss.

class torch.optim.SparseAdam(params, lr=0.001, betas=(0.9, 0.999), eps=1e-08)[source]¶

Implements lazy version of Adam algorithm suitable for sparse tensors.

In this variant, only moments that show up in the gradient get updated, and only those portions of the gradient get applied to the parameters.

Parameters

• params (iterable) – iterable of parameters to optimize or dicts defining parameter groups

• lr (float, optional) – learning rate (default: 1e-3)

• betas (Tuple[float, float], optional) – coefficients used for computing running averages of gradient and its square (default: (0.9, 0.999))

• eps (float, optional) – term added to the denominator to improve numerical stability (default: 1e-8)

step(closure=None)[source]¶

Performs a single optimization step.

Parameters

closure (callable, optional) – A closure that reevaluates the model and returns the loss.

class torch.optim.Adamax(params, lr=0.002, betas=(0.9, 0.999), eps=1e-08, weight_decay=0)[source]¶

Implements Adamax algorithm (a variant of Adam based on infinity norm).

It has been proposed in Adam: A Method for Stochastic Optimization.

Parameters

• params (iterable) – iterable of parameters to optimize or dicts defining parameter groups

• lr (float, optional) – learning rate (default: 2e-3)

• betas (Tuple[float, float], optional) – coefficients used for computing running averages of gradient and its square

• eps (float, optional) – term added to the denominator to improve numerical stability (default: 1e-8)

• weight_decay (float, optional) – weight decay (L2 penalty) (default: 0)

step(closure=None)[source]¶

Performs a single optimization step.

Parameters

closure (callable, optional) – A closure that reevaluates the model and returns the loss.

class torch.optim.ASGD(params, lr=0.01, lambd=0.0001, alpha=0.75, t0=1000000.0, weight_decay=0)[source]¶

Implements Averaged Stochastic Gradient Descent.

It has been proposed in Acceleration of stochastic approximation by averaging.

Parameters

• params (iterable) – iterable of parameters to optimize or dicts defining parameter groups

• lr (float, optional) – learning rate (default: 1e-2)

• lambd (float, optional) – decay term (default: 1e-4)

• alpha (float, optional) – power for eta update (default: 0.75)

• t0 (float, optional) – point at which to start averaging (default: 1e6)

• weight_decay (float, optional) – weight decay (L2 penalty) (default: 0)

step(closure=None)[source]¶

Performs a single optimization step.

Parameters

closure (callable, optional) – A closure that reevaluates the model and returns the loss.

class torch.optim.LBFGS(params, lr=1, max_iter=20, max_eval=None, tolerance_grad=1e-07, tolerance_change=1e-09, history_size=100, line_search_fn=None)[source]¶

Implements L-BFGS algorithm, heavily inspired by minFunc <https://www.cs.ubc.ca/~schmidtm/Software/minFunc.html>.

Warning

This optimizer doesn’t support per-parameter options and parameter groups (there can be only one).

Warning

Right now all parameters have to be on a single device. This will be improved in the future.

Note

This is a very memory intensive optimizer (it requires additional param_bytes * (history_size + 1) bytes). If it doesn’t fit in memory try reducing the history size, or use a different algorithm.

Parameters

• lr (float) – learning rate (default: 1)

• max_iter (int) – maximal number of iterations per optimization step (default: 20)

• max_eval (int) – maximal number of function evaluations per optimization step (default: max_iter * 1.25).

• tolerance_grad (float) – termination tolerance on first order optimality (default: 1e-5).

• tolerance_change (float) – termination tolerance on function value/parameter changes (default: 1e-9).

• history_size (int) – update history size (default: 100).

• line_search_fn (str) – either ‘strong_wolfe’ or None (default: None).

step(closure)[source]¶

Performs a single optimization step.

Parameters

closure (callable) – A closure that reevaluates the model and returns the loss.

class torch.optim.RMSprop(params, lr=0.01, alpha=0.99, eps=1e-08, weight_decay=0, momentum=0, centered=False)[source]¶

Implements RMSprop algorithm.

Proposed by G. Hinton in his course.

The centered version first appears in Generating Sequences With Recurrent Neural Networks.

The implementation here takes the square root of the gradient average before adding epsilon (note that TensorFlow interchanges these two operations). The effective learning rate is thus $\alpha/(\sqrt{v} + \epsilon)$ where $\alpha$ is the scheduled learning rate and $v$ is the weighted moving average of the squared gradient.

Parameters

• params (iterable) – iterable of parameters to optimize or dicts defining parameter groups

• lr (float, optional) – learning rate (default: 1e-2)

• momentum (float, optional) – momentum factor (default: 0)

• alpha (float, optional) – smoothing constant (default: 0.99)

• eps (float, optional) – term added to the denominator to improve numerical stability (default: 1e-8)

• centered (bool, optional) – if True, compute the centered RMSProp, the gradient is normalized by an estimation of its variance

• weight_decay (float, optional) – weight decay (L2 penalty) (default: 0)

step(closure=None)[source]¶

Performs a single optimization step.

Parameters

closure (callable, optional) – A closure that reevaluates the model and returns the loss.

class torch.optim.Rprop(params, lr=0.01, etas=(0.5, 1.2), step_sizes=(1e-06, 50))[source]¶

Implements the resilient backpropagation algorithm.

Parameters

• params (iterable) – iterable of parameters to optimize or dicts defining parameter groups

• lr (float, optional) – learning rate (default: 1e-2)

• etas (Tuple[float, float], optional) – pair of (etaminus, etaplis), that are multiplicative increase and decrease factors (default: (0.5, 1.2))

• step_sizes (Tuple[float, float], optional) – a pair of minimal and maximal allowed step sizes (default: (1e-6, 50))

step(closure=None)[source]¶

Performs a single optimization step.

Parameters

closure (callable, optional) – A closure that reevaluates the model and returns the loss.

class torch.optim.SGD(params, lr=<required parameter>, momentum=0, dampening=0, weight_decay=0, nesterov=False)[source]¶

Implements stochastic gradient descent (optionally with momentum).

Nesterov momentum is based on the formula from On the importance of initialization and momentum in deep learning.

Parameters

• params (iterable) – iterable of parameters to optimize or dicts defining parameter groups

• lr (float) – learning rate

• momentum (float, optional) – momentum factor (default: 0)

• weight_decay (float, optional) – weight decay (L2 penalty) (default: 0)

• dampening (float, optional) – dampening for momentum (default: 0)

• nesterov (bool, optional) – enables Nesterov momentum (default: False)

Example

>>> optimizer = torch.optim.SGD(model.parameters(), lr=0.1, momentum=0.9)
>>> optimizer.zero_grad()
>>> loss_fn(model(input), target).backward()
>>> optimizer.step()

Note

The implementation of SGD with Momentum/Nesterov subtly differs from Sutskever et. al. and implementations in some other frameworks.

Considering the specific case of Momentum, the update can be written as

$$\begin{aligned} v_{t+1} & = \mu * v_{t} + g_{t+1}, \\ p_{t+1} & = p_{t} - \text{lr} * v_{t+1}, \end{aligned}$$

where $p$ , $g$ , $v$ and $\mu$ denote the parameters, gradient, velocity, and momentum respectively.

This is in contrast to Sutskever et. al. and other frameworks which employ an update of the form

$$\begin{aligned} v_{t+1} & = \mu * v_{t} + \text{lr} * g_{t+1}, \\ p_{t+1} & = p_{t} - v_{t+1}. \end{aligned}$$

The Nesterov version is analogously modified.

step(closure=None)[source]¶

Performs a single optimization step.

Parameters

closure (callable, optional) – A closure that reevaluates the model and returns the loss.

How to adjust learning rate¶

torch.optim.lr_scheduler provides several methods to adjust the learning rate based on the number of epochs. torch.optim.lr_scheduler.ReduceLROnPlateau allows dynamic learning rate reducing based on some validation measurements.

Learning rate scheduling should be applied after optimizer’s update; e.g., you should write your code this way:

>>> scheduler = ...
>>> for epoch in range(100):
>>>     train(...)
>>>     validate(...)
>>>     scheduler.step()

class torch.optim.lr_scheduler.LambdaLR(optimizer, lr_lambda, last_epoch=-1, verbose=False)[source]¶

Sets the learning rate of each parameter group to the initial lr times a given function. When last_epoch=-1, sets initial lr as lr.

Parameters

• optimizer (Optimizer) – Wrapped optimizer.

• lr_lambda (function or list) – A function which computes a multiplicative factor given an integer parameter epoch, or a list of such functions, one for each group in optimizer.param_groups.

• last_epoch (int) – The index of last epoch. Default: -1.

• verbose (bool) – If True, prints a message to stdout for each update. Default: False.

Example

>>> # Assuming optimizer has two groups.
>>> lambda1 = lambda epoch: epoch // 30
>>> lambda2 = lambda epoch: 0.95 ** epoch
>>> scheduler = LambdaLR(optimizer, lr_lambda=[lambda1, lambda2])
>>> for epoch in range(100):
>>>     train(...)
>>>     validate(...)
>>>     scheduler.step()

load_state_dict(state_dict)[source]¶

Loads the schedulers state.

Parameters

state_dict (dict) – scheduler state. Should be an object returned from a call to state_dict().

state_dict()[source]¶

Returns the state of the scheduler as a dict.

It contains an entry for every variable in self.__dict__ which is not the optimizer. The learning rate lambda functions will only be saved if they are callable objects and not if they are functions or lambdas.

class torch.optim.lr_scheduler.MultiplicativeLR(optimizer, lr_lambda, last_epoch=-1, verbose=False)[source]¶

Multiply the learning rate of each parameter group by the factor given in the specified function. When last_epoch=-1, sets initial lr as lr.

Parameters

• optimizer (Optimizer) – Wrapped optimizer.

• lr_lambda (function or list) – A function which computes a multiplicative factor given an integer parameter epoch, or a list of such functions, one for each group in optimizer.param_groups.

• last_epoch (int) – The index of last epoch. Default: -1.

• verbose (bool) – If True, prints a message to stdout for each update. Default: False.

Example

>>> lmbda = lambda epoch: 0.95
>>> scheduler = MultiplicativeLR(optimizer, lr_lambda=lmbda)
>>> for epoch in range(100):
>>>     train(...)
>>>     validate(...)
>>>     scheduler.step()

load_state_dict(state_dict)[source]¶

Loads the schedulers state.

Parameters

state_dict (dict) – scheduler state. Should be an object returned from a call to state_dict().

state_dict()[source]¶

Returns the state of the scheduler as a dict.

It contains an entry for every variable in self.__dict__ which is not the optimizer. The learning rate lambda functions will only be saved if they are callable objects and not if they are functions or lambdas.

class torch.optim.lr_scheduler.StepLR(optimizer, step_size, gamma=0.1, last_epoch=-1, verbose=False)[source]¶

Decays the learning rate of each parameter group by gamma every step_size epochs. Notice that such decay can happen simultaneously with other changes to the learning rate from outside this scheduler. When last_epoch=-1, sets initial lr as lr.

Parameters

• optimizer (Optimizer) – Wrapped optimizer.

• step_size (int) – Period of learning rate decay.

• gamma (float) – Multiplicative factor of learning rate decay. Default: 0.1.

• last_epoch (int) – The index of last epoch. Default: -1.

• verbose (bool) – If True, prints a message to stdout for each update. Default: False.

Example

>>> # Assuming optimizer uses lr = 0.05 for all groups
>>> # lr = 0.05     if epoch < 30
>>> # lr = 0.005    if 30 <= epoch < 60
>>> # lr = 0.0005   if 60 <= epoch < 90
>>> # ...
>>> scheduler = StepLR(optimizer, step_size=30, gamma=0.1)
>>> for epoch in range(100):
>>>     train(...)
>>>     validate(...)
>>>     scheduler.step()

class torch.optim.lr_scheduler.MultiStepLR(optimizer, milestones, gamma=0.1, last_epoch=-1, verbose=False)[source]¶

Decays the learning rate of each parameter group by gamma once the number of epoch reaches one of the milestones. Notice that such decay can happen simultaneously with other changes to the learning rate from outside this scheduler. When last_epoch=-1, sets initial lr as lr.

Parameters

• optimizer (Optimizer) – Wrapped optimizer.

• milestones (list) – List of epoch indices. Must be increasing.

• gamma (float) – Multiplicative factor of learning rate decay. Default: 0.1.

• last_epoch (int) – The index of last epoch. Default: -1.

• verbose (bool) – If True, prints a message to stdout for each update. Default: False.

Example

>>> # Assuming optimizer uses lr = 0.05 for all groups
>>> # lr = 0.05     if epoch < 30
>>> # lr = 0.005    if 30 <= epoch < 80
>>> # lr = 0.0005   if epoch >= 80
>>> scheduler = MultiStepLR(optimizer, milestones=[30,80], gamma=0.1)
>>> for epoch in range(100):
>>>     train(...)
>>>     validate(...)
>>>     scheduler.step()

class torch.optim.lr_scheduler.ExponentialLR(optimizer, gamma, last_epoch=-1, verbose=False)[source]¶

Decays the learning rate of each parameter group by gamma every epoch. When last_epoch=-1, sets initial lr as lr.

Parameters

• optimizer (Optimizer) – Wrapped optimizer.

• gamma (float) – Multiplicative factor of learning rate decay.

• last_epoch (int) – The index of last epoch. Default: -1.

• verbose (bool) – If True, prints a message to stdout for each update. Default: False.

class torch.optim.lr_scheduler.CosineAnnealingLR(optimizer, T_max, eta_min=0, last_epoch=-1, verbose=False)[source]¶

Set the learning rate of each parameter group using a cosine annealing schedule, where $\eta_{max}$ is set to the initial lr and $T_{cur}$ is the number of epochs since the last restart in SGDR:

$$\begin{aligned} \eta_t & = \eta_{min} + \frac{1}{2}(\eta_{max} - \eta_{min})\left(1 + \cos\left(\frac{T_{cur}}{T_{max}}\pi\right)\right), & T_{cur} \neq (2k+1)T_{max}; \\ \eta_{t+1} & = \eta_{t} + \frac{1}{2}(\eta_{max} - \eta_{min}) \left(1 - \cos\left(\frac{1}{T_{max}}\pi\right)\right), & T_{cur} = (2k+1)T_{max}. \end{aligned}$$

When last_epoch=-1, sets initial lr as lr. Notice that because the schedule is defined recursively, the learning rate can be simultaneously modified outside this scheduler by other operators. If the learning rate is set solely by this scheduler, the learning rate at each step becomes:

$$\eta_t = \eta_{min} + \frac{1}{2}(\eta_{max} - \eta_{min})\left(1 + \cos\left(\frac{T_{cur}}{T_{max}}\pi\right)\right)$$

It has been proposed in SGDR: Stochastic Gradient Descent with Warm Restarts. Note that this only implements the cosine annealing part of SGDR, and not the restarts.

Parameters

• optimizer (Optimizer) – Wrapped optimizer.

• T_max (int) – Maximum number of iterations.

• eta_min (float) – Minimum learning rate. Default: 0.

• last_epoch (int) – The index of last epoch. Default: -1.

• verbose (bool) – If True, prints a message to stdout for each update. Default: False.

class torch.optim.lr_scheduler.ReduceLROnPlateau(optimizer, mode='min', factor=0.1, patience=10, threshold=0.0001, threshold_mode='rel', cooldown=0, min_lr=0, eps=1e-08, verbose=False)[source]¶

Reduce learning rate when a metric has stopped improving. Models often benefit from reducing the learning rate by a factor of 2-10 once learning stagnates. This scheduler reads a metrics quantity and if no improvement is seen for a ‘patience’ number of epochs, the learning rate is reduced.

Parameters

• optimizer (Optimizer) – Wrapped optimizer.

• mode (str) – One of min, max. In min mode, lr will be reduced when the quantity monitored has stopped decreasing; in max mode it will be reduced when the quantity monitored has stopped increasing. Default: ‘min’.

• factor (float) – Factor by which the learning rate will be reduced. new_lr = lr * factor. Default: 0.1.

• patience (int) – Number of epochs with no improvement after which learning rate will be reduced. For example, if patience = 2, then we will ignore the first 2 epochs with no improvement, and will only decrease the LR after the 3rd epoch if the loss still hasn’t improved then. Default: 10.

• threshold (float) – Threshold for measuring the new optimum, to only focus on significant changes. Default: 1e-4.

• threshold_mode (str) – One of rel, abs. In rel mode, dynamic_threshold = best * ( 1 + threshold ) in ‘max’ mode or best * ( 1 - threshold ) in min mode. In abs mode, dynamic_threshold = best + threshold in max mode or best - threshold in min mode. Default: ‘rel’.

• cooldown (int) – Number of epochs to wait before resuming normal operation after lr has been reduced. Default: 0.

• min_lr (float or list) – A scalar or a list of scalars. A lower bound on the learning rate of all param groups or each group respectively. Default: 0.

• eps (float) – Minimal decay applied to lr. If the difference between new and old lr is smaller than eps, the update is ignored. Default: 1e-8.

• verbose (bool) – If True, prints a message to stdout for each update. Default: False.

Example

>>> optimizer = torch.optim.SGD(model.parameters(), lr=0.1, momentum=0.9)
>>> scheduler = ReduceLROnPlateau(optimizer, 'min')
>>> for epoch in range(10):
>>>     train(...)
>>>     val_loss = validate(...)
>>>     # Note that step should be called after validate()
>>>     scheduler.step(val_loss)

class torch.optim.lr_scheduler.CyclicLR(optimizer, base_lr, max_lr, step_size_up=2000, step_size_down=None, mode='triangular', gamma=1.0, scale_fn=None, scale_mode='cycle', cycle_momentum=True, base_momentum=0.8, max_momentum=0.9, last_epoch=-1, verbose=False)[source]¶

Sets the learning rate of each parameter group according to cyclical learning rate policy (CLR). The policy cycles the learning rate between two boundaries with a constant frequency, as detailed in the paper Cyclical Learning Rates for Training Neural Networks. The distance between the two boundaries can be scaled on a per-iteration or per-cycle basis.

Cyclical learning rate policy changes the learning rate after every batch. step should be called after a batch has been used for training.

This class has three built-in policies, as put forth in the paper:

• “triangular”: A basic triangular cycle without amplitude scaling.

• “triangular2”: A basic triangular cycle that scales initial amplitude by half each cycle.

• “exp_range”: A cycle that scales initial amplitude by $\text{gamma}^{\text{cycle iterations}}$ at each cycle iteration.

This implementation was adapted from the github repo: bckenstler/CLR

Parameters

• optimizer (Optimizer) – Wrapped optimizer.

• base_lr (float or list) – Initial learning rate which is the lower boundary in the cycle for each parameter group.

• max_lr (float or list) – Upper learning rate boundaries in the cycle for each parameter group. Functionally, it defines the cycle amplitude (max_lr - base_lr). The lr at any cycle is the sum of base_lr and some scaling of the amplitude; therefore max_lr may not actually be reached depending on scaling function.

• step_size_up (int) – Number of training iterations in the increasing half of a cycle. Default: 2000

• step_size_down (int) – Number of training iterations in the decreasing half of a cycle. If step_size_down is None, it is set to step_size_up. Default: None

• mode (str) – One of {triangular, triangular2, exp_range}. Values correspond to policies detailed above. If scale_fn is not None, this argument is ignored. Default: ‘triangular’

• gamma (float) – Constant in ‘exp_range’ scaling function: gamma**(cycle iterations) Default: 1.0

• scale_fn (function) – Custom scaling policy defined by a single argument lambda function, where 0 <= scale_fn(x) <= 1 for all x >= 0. If specified, then ‘mode’ is ignored. Default: None

• scale_mode (str) – {‘cycle’, ‘iterations’}. Defines whether scale_fn is evaluated on cycle number or cycle iterations (training iterations since start of cycle). Default: ‘cycle’

• cycle_momentum (bool) – If True, momentum is cycled inversely to learning rate between ‘base_momentum’ and ‘max_momentum’. Default: True

• base_momentum (float or list) – Lower momentum boundaries in the cycle for each parameter group. Note that momentum is cycled inversely to learning rate; at the peak of a cycle, momentum is ‘base_momentum’ and learning rate is ‘max_lr’. Default: 0.8

• max_momentum (float or list) – Upper momentum boundaries in the cycle for each parameter group. Functionally, it defines the cycle amplitude (max_momentum - base_momentum). The momentum at any cycle is the difference of max_momentum and some scaling of the amplitude; therefore base_momentum may not actually be reached depending on scaling function. Note that momentum is cycled inversely to learning rate; at the start of a cycle, momentum is ‘max_momentum’ and learning rate is ‘base_lr’ Default: 0.9

• last_epoch (int) – The index of the last batch. This parameter is used when resuming a training job. Since step() should be invoked after each batch instead of after each epoch, this number represents the total number of batches computed, not the total number of epochs computed. When last_epoch=-1, the schedule is started from the beginning. Default: -1

• verbose (bool) – If True, prints a message to stdout for each update. Default: False.

Example

>>> optimizer = torch.optim.SGD(model.parameters(), lr=0.1, momentum=0.9)
>>> scheduler = torch.optim.lr_scheduler.CyclicLR(optimizer, base_lr=0.01, max_lr=0.1)
>>> data_loader = torch.utils.data.DataLoader(...)
>>> for epoch in range(10):
>>>     for batch in data_loader:
>>>         train_batch(...)
>>>         scheduler.step()

get_lr()[source]¶

Calculates the learning rate at batch index. This function treats self.last_epoch as the last batch index.

If self.cycle_momentum is True, this function has a side effect of updating the optimizer’s momentum.

class torch.optim.lr_scheduler.OneCycleLR(optimizer, max_lr, total_steps=None, epochs=None, steps_per_epoch=None, pct_start=0.3, anneal_strategy='cos', cycle_momentum=True, base_momentum=0.85, max_momentum=0.95, div_factor=25.0, final_div_factor=10000.0, last_epoch=-1, verbose=False)[source]¶

Sets the learning rate of each parameter group according to the 1cycle learning rate policy. The 1cycle policy anneals the learning rate from an initial learning rate to some maximum learning rate and then from that maximum learning rate to some minimum learning rate much lower than the initial learning rate. This policy was initially described in the paper Super-Convergence: Very Fast Training of Neural Networks Using Large Learning Rates.

The 1cycle learning rate policy changes the learning rate after every batch. step should be called after a batch has been used for training.

This scheduler is not chainable.

Note also that the total number of steps in the cycle can be determined in one of two ways (listed in order of precedence):

1. A value for total_steps is explicitly provided.

2. A number of epochs (epochs) and a number of steps per epoch (steps_per_epoch) are provided. In this case, the number of total steps is inferred by total_steps = epochs * steps_per_epoch

You must either provide a value for total_steps or provide a value for both epochs and steps_per_epoch.

Parameters

• optimizer (Optimizer) – Wrapped optimizer.

• max_lr (float or list) – Upper learning rate boundaries in the cycle for each parameter group.

• total_steps (int) – The total number of steps in the cycle. Note that if a value is not provided here, then it must be inferred by providing a value for epochs and steps_per_epoch. Default: None

• epochs (int) – The number of epochs to train for. This is used along with steps_per_epoch in order to infer the total number of steps in the cycle if a value for total_steps is not provided. Default: None

• steps_per_epoch (int) – The number of steps per epoch to train for. This is used along with epochs in order to infer the total number of steps in the cycle if a value for total_steps is not provided. Default: None

• pct_start (float) – The percentage of the cycle (in number of steps) spent increasing the learning rate. Default: 0.3

• anneal_strategy (str) – {‘cos’, ‘linear’} Specifies the annealing strategy: “cos” for cosine annealing, “linear” for linear annealing. Default: ‘cos’

• cycle_momentum (bool) – If True, momentum is cycled inversely to learning rate between ‘base_momentum’ and ‘max_momentum’. Default: True

• base_momentum (float or list) – Lower momentum boundaries in the cycle for each parameter group. Note that momentum is cycled inversely to learning rate; at the peak of a cycle, momentum is ‘base_momentum’ and learning rate is ‘max_lr’. Default: 0.85

• max_momentum (float or list) – Upper momentum boundaries in the cycle for each parameter group. Functionally, it defines the cycle amplitude (max_momentum - base_momentum). Note that momentum is cycled inversely to learning rate; at the start of a cycle, momentum is ‘max_momentum’ and learning rate is ‘base_lr’ Default: 0.95

• div_factor (float) – Determines the initial learning rate via initial_lr = max_lr/div_factor Default: 25

• final_div_factor (float) – Determines the minimum learning rate via min_lr = initial_lr/final_div_factor Default: 1e4

• last_epoch (int) – The index of the last batch. This parameter is used when resuming a training job. Since step() should be invoked after each batch instead of after each epoch, this number represents the total number of batches computed, not the total number of epochs computed. When last_epoch=-1, the schedule is started from the beginning. Default: -1

• verbose (bool) – If True, prints a message to stdout for each update. Default: False.

Example

>>> data_loader = torch.utils.data.DataLoader(...)
>>> optimizer = torch.optim.SGD(model.parameters(), lr=0.1, momentum=0.9)
>>> scheduler = torch.optim.lr_scheduler.OneCycleLR(optimizer, max_lr=0.01, steps_per_epoch=len(data_loader), epochs=10)
>>> for epoch in range(10):
>>>     for batch in data_loader:
>>>         train_batch(...)
>>>         scheduler.step()

class torch.optim.lr_scheduler.CosineAnnealingWarmRestarts(optimizer, T_0, T_mult=1, eta_min=0, last_epoch=-1, verbose=False)[source]¶

Set the learning rate of each parameter group using a cosine annealing schedule, where $\eta_{max}$ is set to the initial lr, $T_{cur}$ is the number of epochs since the last restart and $T_{i}$ is the number of epochs between two warm restarts in SGDR:

$$\eta_t = \eta_{min} + \frac{1}{2}(\eta_{max} - \eta_{min})\left(1 + \cos\left(\frac{T_{cur}}{T_{i}}\pi\right)\right)$$

When $T_{cur}=T_{i}$ , set $\eta_t = \eta_{min}$ . When $T_{cur}=0$ after restart, set $\eta_t=\eta_{max}$ .

It has been proposed in SGDR: Stochastic Gradient Descent with Warm Restarts.

Parameters

• optimizer (Optimizer) – Wrapped optimizer.

• T_0 (int) – Number of iterations for the first restart.

• T_mult (int, optional) – A factor increases $T_{i}$ after a restart. Default: 1.

• eta_min (float, optional) – Minimum learning rate. Default: 0.

• last_epoch (int, optional) – The index of last epoch. Default: -1.

• verbose (bool) – If True, prints a message to stdout for each update. Default: False.

step(epoch=None)[source]¶

Step could be called after every batch update

Example

>>> scheduler = CosineAnnealingWarmRestarts(optimizer, T_0, T_mult)
>>> iters = len(dataloader)
>>> for epoch in range(20):
>>>     for i, sample in enumerate(dataloader):
>>>         inputs, labels = sample['inputs'], sample['labels']
>>>         optimizer.zero_grad()
>>>         outputs = net(inputs)
>>>         loss = criterion(outputs, labels)
>>>         loss.backward()
>>>         optimizer.step()
>>>         scheduler.step(epoch + i / iters)

This function can be called in an interleaved way.

Example

>>> scheduler = CosineAnnealingWarmRestarts(optimizer, T_0, T_mult)
>>> for epoch in range(20):
>>>     scheduler.step()
>>> scheduler.step(26)
>>> scheduler.step() # scheduler.step(27), instead of scheduler(20)

Stochastic Weight Averaging¶

torch.optim.swa_utils implements Stochastic Weight Averaging (SWA). In particular, torch.optim.swa_utils.AveragedModel class implements SWA models, torch.optim.swa_utils.SWALR implements the SWA learning rate scheduler and torch.optim.swa_utils.update_bn() is a utility function used to update SWA batch normalization statistics at the end of training.

SWA has been proposed in Averaging Weights Leads to Wider Optima and Better Generalization.

>>> swa_model = AveragedModel(model)

>>> swa_model.update_parameters(model)

>>> swa_scheduler = torch.optim.swa_utils.SWALR(optimizer, \
>>>         anneal_strategy="linear", anneal_epochs=5, swa_lr=0.05)

>>> torch.optim.swa_utils.update_bn(loader, swa_model)

>>> ema_avg = lambda averaged_model_parameter, model_parameter, num_averaged:\
>>>         0.1 * averaged_model_parameter + 0.9 * model_parameter
>>> ema_model = torch.optim.swa_utils.AveragedModel(model, avg_fn=ema_avg)

>>> loader, optimizer, model, loss_fn = ...
>>> swa_model = torch.optim.swa_utils.AveragedModel(model)
>>> scheduler = torch.optim.lr_scheduler.CosineAnnealingLR(optimizer, T_max=300)
>>> swa_start = 160
>>> swa_scheduler = SWALR(optimizer, swa_lr=0.05)
>>>
>>> for epoch in range(300):
>>>       for input, target in loader:
>>>           optimizer.zero_grad()
>>>           loss_fn(model(input), target).backward()
>>>           optimizer.step()
>>>       if i > swa_start:
>>>           swa_model.update_parameters(model)
>>>           swa_scheduler.step()
>>>       else:
>>>           scheduler.step()
>>>
>>> # Update bn statistics for the swa_model at the end
>>> torch.optim.swa_utils.update_bn(loader, swa_model)
>>> # Use swa_model to make predictions on test data
>>> preds = swa_model(test_input)